Support Center

RMS Network Requirements

Last Updated: Jan 31, 2017 05:14PM PST
Article: 2.01-kdb-0004 



 The attached pdf document is an in depth article regarding network requirements that are needed when the gateway system is installed on a secure network. Please pass this along to the appropriate IT personnel if experiencing any errors or connection issues when trying to register your token in the gateway. In addition, please verify that your Default Gateway and DNS addresses are properly configured, as the gateway uses the Domain Name Service (DNS) protocol to establish connection to the Next Level Cloud Services servers.  


Note: The information presented is only relevant if there is a firewall, web-proxy, or other network appliance blocking outbound traffic or ports. If you do not block outbound ports or network traffic, or the gateway is situated on a simple network with little to no restrictions, then this document probably does not apply to you.

If connections to RMS are still problematic, please verify all network settings are correct.  Please see the following knowledge base article for instructions on validating all gateway network settings: http://j.mp/127s7LZ (http://j.mp/127s7LZ)

Hardware Affected: GW5000, GW4500, GW4000, GW3000, GW500
Software Affected: All

Contact Information
For more information, please see https://support.nlss.com (https://support.nlss.com/) or email support@nlss.com
0d564f32803c60bd6a0a0c8b3b3ea9d9@nextlevelsecurity.desk-mail.com
http://assets3.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete