The procedure to expand views into Full Screen mode in the gateway have slightly changed in the latest 3.2 firmware release. The below process will guide you through the new method.
Hardware Affected: GW5000, GW4500, GW4000, GW3000, GW500
Software Affected: 3.2.34452 or above
After creating a view, follow the steps below:
Choose the desired view you have created under the Operations>Views module.
Select the â€˜Full Screenâ€™ located at the bottom below the view.
Note: This will ONLY expand the browser application into Full Screen mode. NOT the view.
Now choose the new â€˜Transport Controlâ€™ option located at the top-right section of the browser window.
Below the view, the Transport Control area will populate.
Choose the â€˜Full Screenâ€™ icon located furthest on the right above the video timeline bar. This will bring your current view into Full Screen mode.
To exit Full Screen mode, simply click the Full Screen icon again.
For more information, please see https://support.nlss.com or email firstname.lastname@example.org