Repair disk when Decoder is powered off incorrectly. Discovered by connecting directly to Decoder with keyboard/monitor. Look for â€œmount of file system failedâ€� or similar when viewing boot cycle.
Symptoms: Decoder not discoverable or functioning.
Hardware Affected: DC400, DC400-2
Description of the Process
Obtain direct access to Decoder (keyboard/monitor)
Power on Decoder
Wait for prompt
enter the following to run a disk check/repair
fsck -yC /dev/sda1
Wait for disk check/repair to complete
It may be necessary to force a restart (at prompt, type: reboot and then hit enter)
Upon restart, Decoder should be functioning properly and discoverable.
For more information, please see https://support.nlss.com or email firstname.lastname@example.org