Support Center

How to discover NLSS devices in Apple OSX

Last Updated: Jan 31, 2017 03:34PM PST
Article: 1.00-kdb-0001 



 NLSS has built a discovery tool for Windows users to be able to discover the IP address of NLSS devices, but what if you're using Apple OSX?

NLSS Devices run a discovery program called Bonjour (Apple's implementation of Zero configuration networking).  NLSS Devices will respond to Bonjour queries from any Bonjour discovery tool.  Apple has built a Bonjour discovery tool into the Sarari Web Browser that can be leveraged to discover any NLSS devices on the same Layer 2 network.

Layer 2 networks are those which are generally within the same physical network.  Bonjour is a multicast protocol, and most routers do not route multicast traffic, by default.  Therefore, you are likely only to discover a NLSS device within the same physical network your computer is connected to.

Hardware Affected: GW500, GW3000, GW4000, GW4500, GW5000, DC400, DC400-2
Software Affected: 2.0 or greater 

 



 Using Safari to Discover an NLSS Device 

 



  From the applications folder, open Safari 

 Depending on your version of operating system, you may need to enable Bonjour Browser in your toolbar.  Go to Preferences, choose Bookmarks, and under “Bookmarks Barâ€� make sure to click the check box next to “include Bonjourâ€�. 

 Exit preferences and you should now see “Bonjourâ€� in your apple toolbar.  Click this and you should see your NLSS Device in the menu. 

 If you still cannot see you your NLSS Device, please refer back to the support section.



 Contact Information 

For more information, please see https://support.nlss.com or email support@nlss.com

Contact Us

0d564f32803c60bd6a0a0c8b3b3ea9d9@nextlevelsecurity.desk-mail.com
http://assets2.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete